Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.


QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

PLUS2(0, s1(x)) -> PLUS2(0, x)
GE2(s1(x), 0) -> GE2(x, 0)
IFY3(true, x, y) -> GE2(x, y)
DIV2(x, y) -> IFY3(ge2(y, s1(0)), x, y)
MINUS2(s1(x), s1(y)) -> MINUS2(x, y)
DIV2(x, y) -> GE2(y, s1(0))
GE2(0, s1(s1(x))) -> GE2(0, s1(x))
IF3(true, x, y) -> DIV2(minus2(x, y), y)
PLUS2(s1(x), y) -> PLUS2(x, y)
MINUS2(0, s1(x)) -> MINUS2(0, x)
MINUS2(s1(x), 0) -> MINUS2(x, 0)
IF3(true, x, y) -> MINUS2(x, y)
IFY3(true, x, y) -> IF3(ge2(x, y), x, y)
GE2(s1(x), s1(y)) -> GE2(x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
QDP
      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

PLUS2(0, s1(x)) -> PLUS2(0, x)
GE2(s1(x), 0) -> GE2(x, 0)
IFY3(true, x, y) -> GE2(x, y)
DIV2(x, y) -> IFY3(ge2(y, s1(0)), x, y)
MINUS2(s1(x), s1(y)) -> MINUS2(x, y)
DIV2(x, y) -> GE2(y, s1(0))
GE2(0, s1(s1(x))) -> GE2(0, s1(x))
IF3(true, x, y) -> DIV2(minus2(x, y), y)
PLUS2(s1(x), y) -> PLUS2(x, y)
MINUS2(0, s1(x)) -> MINUS2(0, x)
MINUS2(s1(x), 0) -> MINUS2(x, 0)
IF3(true, x, y) -> MINUS2(x, y)
IFY3(true, x, y) -> IF3(ge2(x, y), x, y)
GE2(s1(x), s1(y)) -> GE2(x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 9 SCCs with 3 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PLUS2(0, s1(x)) -> PLUS2(0, x)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PLUS2(0, s1(x)) -> PLUS2(0, x)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(0) = 0   
POL(PLUS2(x1, x2)) = 2·x2   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PLUS2(s1(x), y) -> PLUS2(x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PLUS2(s1(x), y) -> PLUS2(x, y)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(PLUS2(x1, x2)) = 2·x1   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MINUS2(s1(x), 0) -> MINUS2(x, 0)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


MINUS2(s1(x), 0) -> MINUS2(x, 0)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(0) = 0   
POL(MINUS2(x1, x2)) = 2·x1   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MINUS2(0, s1(x)) -> MINUS2(0, x)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


MINUS2(0, s1(x)) -> MINUS2(0, x)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(0) = 0   
POL(MINUS2(x1, x2)) = 2·x2   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MINUS2(s1(x), s1(y)) -> MINUS2(x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


MINUS2(s1(x), s1(y)) -> MINUS2(x, y)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(MINUS2(x1, x2)) = 2·x1 + x2   
POL(s1(x1)) = 2 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

GE2(0, s1(s1(x))) -> GE2(0, s1(x))

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


GE2(0, s1(s1(x))) -> GE2(0, s1(x))
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(0) = 0   
POL(GE2(x1, x2)) = 2·x2   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

GE2(s1(x), 0) -> GE2(x, 0)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


GE2(s1(x), 0) -> GE2(x, 0)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(0) = 0   
POL(GE2(x1, x2)) = 2·x1   
POL(s1(x1)) = 1 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

GE2(s1(x), s1(y)) -> GE2(x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


GE2(s1(x), s1(y)) -> GE2(x, y)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [21]:

POL(GE2(x1, x2)) = 2·x1 + x2   
POL(s1(x1)) = 2 + 2·x1   

The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ PisEmptyProof
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP

Q DP problem:
The TRS P consists of the following rules:

IF3(true, x, y) -> DIV2(minus2(x, y), y)
IFY3(true, x, y) -> IF3(ge2(x, y), x, y)
DIV2(x, y) -> IFY3(ge2(y, s1(0)), x, y)

The TRS R consists of the following rules:

ge2(0, 0) -> true
ge2(s1(x), 0) -> ge2(x, 0)
ge2(0, s1(0)) -> false
ge2(0, s1(s1(x))) -> ge2(0, s1(x))
ge2(s1(x), s1(y)) -> ge2(x, y)
minus2(0, 0) -> 0
minus2(0, s1(x)) -> minus2(0, x)
minus2(s1(x), 0) -> s1(minus2(x, 0))
minus2(s1(x), s1(y)) -> minus2(x, y)
plus2(0, 0) -> 0
plus2(0, s1(x)) -> s1(plus2(0, x))
plus2(s1(x), y) -> s1(plus2(x, y))
div2(x, y) -> ify3(ge2(y, s1(0)), x, y)
ify3(false, x, y) -> divByZeroError
ify3(true, x, y) -> if3(ge2(x, y), x, y)
if3(false, x, y) -> 0
if3(true, x, y) -> s1(div2(minus2(x, y), y))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.